VERICUT Users' Forum

Due to relentless spammers, we are no longer automatically accepting new forum registrations. If you wish to register for this forum, please send an e-mail to: info@cgtech.com

You are not logged in.

#1 2005-04-05 15:56:45

kathy
Member
Registered: 2004-12-10
Posts: 6
Website

Unigraphics

Are there any Unigraphics users out there?

Thanks, Kathy

Offline

#2 2005-04-12 09:51:06

paehv
Senior Member
From: Eindhoven, Netherlands
Registered: 2005-01-17
Posts: 160
Website

Re: Unigraphics

Here's one.


Patrick Delisse
KMWE Aerospacehttps://www.kmwe.com
(Vericut V9.4.1, Siemens NX2206, Campost)

Offline

#3 2005-04-12 15:57:10

Kantha
Senior Member
From: Boston
Registered: 2004-11-11
Posts: 48

Re: Unigraphics

Hi,

     We use Unigraphics.

Kantha

Offline

#4 2005-04-29 18:39:38

Jim Klug
Member
From: Sedro Woolley, WA
Registered: 2004-11-11
Posts: 1

Re: Unigraphics

I've used Unigraphics since v9


Jim Klug
NC Programmer
Janicki Industries
Sedro Woolley, WA
(360)856-5143 ex1808
email: jklug@janicki.com

Offline

#5 2005-06-03 17:57:43

moudy
Member
Registered: 2004-11-11
Posts: 19

Re: Unigraphics

UG user since V9. Vericut user since V4.4

Offline

#6 2005-06-21 21:40:04

Cadpocam
Member
From: Westminster, Colorado
Registered: 2005-01-12
Posts: 1
Website

Re: Unigraphics

I’ve been using UG since UGI 20 + years.  I have been using Vericut off and on since the early 90’s.  John Prun was my first Vericut trainer.

John Joyce

Cadpo


John L. Joyce | Team Leader Ready5 | Cadpo

1490 West 121st Ave, Suite 201 | Westminster, CO 80234

ph 303.252.8485 fx 303.252.8436
em joyce@cadpo.com
wb www.cadpo.com
Get Up To Speed
MCAD/CAM/PLM eLearning, Training & Engineering Services

Offline

#7 2005-06-29 22:32:39

Louis Bigelow
Member
From: Santa Fe Springs Ca.
Registered: 2004-11-11
Posts: 12
Website

Re: Unigraphics

we have UG, don't use it much though.
Louis

Offline

#8 2005-07-01 17:17:38

Louis Bigelow
Member
From: Santa Fe Springs Ca.
Registered: 2004-11-11
Posts: 12
Website

Re: Unigraphics

AND HERE'S ONE REASON WHY!

(JUST RECIEVED FROM UNIGRAPHICS!)

   01-JUL-2005




   LOUIS BIGELOW
   TURBINE ENGINES
   8839 PIONEER BLVD.
   SANTA FE SPRINGS, CA 90670-200

Dear Louis,

Our UNIGRAPHICS_NX development team has investigated PR Number 4473676 and determined
that this problem will not be fixed. If you would like to discuss this further,
please call GTAC at 1-800-955-0000 or 1-714-952-5444 and select the appropriate
support group. If you wish, the representative will connect you with the
appropriate development supervisor, Tim Fu.

The problem where you reported the error, "Thru face does not intersect path
of the tool" to perform subtraction, has been closed as no fix.

Since this problem was reported to us, our engineers have performed a detailed
analysis of the data on at least three separate occasions. Each time we have
been unable to devise a fix and consequently we have concluded that a
resolution to the problem is not feasible.

The problem has therefore been closed as No Fix in our database, and no
further attempts to resolve it will be made.

The data for this issue will remain in our test suite and should it be
discovered fixed in the future, you will be informed of this.



Sincerely,



The Global Technical Access Center Team

Offline

#9 2005-07-13 09:28:21

stpendl
Senior Member
From: Nussbach, AUSTRIA
Registered: 2005-07-12
Posts: 134
Website

Re: Unigraphics

We use Unigraphics since UGII 3.1 and VERICUT since V4.1

I started to use UG with V10.3


Stefan Pendl

Systemmanager CAD/CAM
Windows 10 x64 Edition, Vericut 9.0

Offline

#10 2005-11-21 14:06:59

JohnG
Member
From: Chino, California
Registered: 2005-11-18
Posts: 1

Re: Unigraphics

I use a combination of UG and NCL for manufacturing. They complement each other nicely. UG's strengths are NCL weaknesses and vice versa. This system has worked necely for the last 5 or 6 years. I am able to easily integrate the code with the ability to quickly add any required modifications of updates.

John Gates

Offline

#11 2005-11-22 06:13:23

sae
Member
From: Sweden
Registered: 2005-04-26
Posts: 20

Re: Unigraphics

Hi!

I use UG since 1990 .

/sae

Offline

#12 2006-01-24 11:52:55

qsjxs_2005
Member
From: Ch
Registered: 2006-01-24
Posts: 1

Re: Unigraphics

:x

I have been using pro/E
and now i want to learn how to use UG now~

so i may be one user~

Offline

#13 2006-01-25 11:07:40

chrism
Member
From: UK
Registered: 2006-01-24
Posts: 8

Re: Unigraphics

Hi,

We have used UG since v13, now at NX3
Vericut user since 4.4

Chris Martin
Cam Programmer
............................................
Red Bull Racing


Chris M
UK

Offline

#14 2007-02-01 11:56:40

schnth
Member
From: Switzerland
Registered: 2007-01-23
Posts: 2
Website

Re: Unigraphics

Hi,

I'm using UG since V15, Vericut since V4.4


Thomas Schnider
CAM Programmer

Pilatus Aircraft Ltd.


________________

Thomas Schnider
CAD/CAM Engineer

Pilatus Aircraft Ltd.

Offline

#15 2007-02-27 16:59:43

Richard A. Vernon
Member
From: East Hartford CT
Registered: 2007-02-27
Posts: 1

Re: Unigraphics

Hi,
I've used UG since v6 (1988) and Vericut since v1.2 (1989) but have been out of the loop for some time working on manufacturing standard work.

It's refreshing to recognize so many names and companies in this forum.

smile


Rick Vernon
Pratt & Whitney
860-565-3293
Richard.Vernon@pw.utc.com

Offline

Board footer