VERICUT Users' Forum
You are not logged in.
- Topics: Active | Unanswered
#1 2011-03-11 15:17:32
- mikengineer2
- Member
- Registered: 2010-08-20
- Posts: 2
Windows 7 x64 w/ 7.1.1 x64 License messages and errors
If there are licensing messages or errors upon reopening VeriCut 7.1.1 x64 in a Win 7 x64 environment, the "Environment Variable" may not be correctly set by the default installation. This was corrected through CG Tech support for me and I will pass this along. In Win 7, go to Control Panel--> System--> Advanced System Settings-->click on the "Environment Variables" button at the bottom of the "System Properties" pane--> In the "System Variable" pane at the bottom of the page, the LSERVOPTS string must be edited to show this string -s "C:\Program Files\cgtech\7.1.1\windows64\license\cgtech.lf" . This was a standard installation with the default directories used...
After this was corrected the 7.1.1 will now open and close properly after all situations and restarts/reboots. My thanks to Tim Mcdonald for this fix.......
Offline
#2 2015-03-19 02:03:52
- SERGIO QUINTINO
- Member
- Registered: 2015-03-18
- Posts: 5
Re: Windows 7 x64 w/ 7.1.1 x64 License messages and errors
My problem is this installed the latest version VERICUT 7.3.3 and click to open it it gives error and a message : License Server found, but license information CGTech are not present ( may be wrong version ) .
Because I think that is my license that needs to be edited , do not know ...
... Can anyone help me ?
Offline
#3 2015-03-19 09:43:22
- stpendl
- Senior Member
- From: Nussbach, AUSTRIA
- Registered: 2005-07-12
- Posts: 134
- Website
Re: Windows 7 x64 w/ 7.1.1 x64 License messages and errors
What version is shown in the license administration panel on the license server?
If it is not 7.3, then you need to get the correct license version from CGTech.
Stefan Pendl
Systemmanager CAD/CAM
Windows 10 x64 Edition, Vericut 9.0
Offline
#4 2015-03-19 22:37:04
- SERGIO QUINTINO
- Member
- Registered: 2015-03-18
- Posts: 5
Re: Windows 7 x64 w/ 7.1.1 x64 License messages and errors
I went to "Start> All Programs> CGTech VERICUT 7.3.3 > License Administrator > License Administrator SentinelLM ( WlmAdmin ) , Subnet Servers and clicked the signal d + and then the + sign again and then appeared to version 7.3. this procedure is right?
If so, what should I do if the version is correct?
Thank you for your attention and help.
Offline
#5 2015-03-20 12:52:07
- stpendl
- Senior Member
- From: Nussbach, AUSTRIA
- Registered: 2005-07-12
- Posts: 134
- Website
Re: Windows 7 x64 w/ 7.1.1 x64 License messages and errors
Have you updated the license server to version 7.3 too?
Is your license server a virtual one, then you need a different license file.
Stefan Pendl
Systemmanager CAD/CAM
Windows 10 x64 Edition, Vericut 9.0
Offline
#6 2015-03-21 07:01:47
- SERGIO QUINTINO
- Member
- Registered: 2015-03-18
- Posts: 5
Re: Windows 7 x64 w/ 7.1.1 x64 License messages and errors
I uninstalled and reinstalled , tried all versions , which were 7.0, 7.1.4 , 7.3 , 7.3.1 and 7.3.3 , all have the same problem the same error message.
I changed the license files with each other and nothing , the problem perciste .
I'm impreção that are license files that need to be edited.
Thanks for your help and attention.
Offline
#7 2015-03-23 09:57:04
- stpendl
- Senior Member
- From: Nussbach, AUSTRIA
- Registered: 2005-07-12
- Posts: 134
- Website
Re: Windows 7 x64 w/ 7.1.1 x64 License messages and errors
You can't edit the license file, you will have to request a new license file if you change the server or its hardware.
Stefan Pendl
Systemmanager CAD/CAM
Windows 10 x64 Edition, Vericut 9.0
Offline
#8 2015-03-27 02:53:38
- SERGIO QUINTINO
- Member
- Registered: 2015-03-18
- Posts: 5
Re: Windows 7 x64 w/ 7.1.1 x64 License messages and errors
But my Vericut is not the original , it was through a download, and the Crack file came along with it , I did not buy the software .
Where could I find a valid license aquivo ?
Thank you for helping me and for having patience with me .
Last edited by SERGIO QUINTINO (2015-03-31 04:56:38)
Offline
#9 2015-03-28 23:01:52
- Verifun
- Senior Member
- From: U.S.
- Registered: 2005-03-31
- Posts: 351
- Website
Re: Windows 7 x64 w/ 7.1.1 x64 License messages and errors
But my Vericut is not the original , it was through a download, and the Crack file came along with it , I did not buy the software .
Where could I find a valid license aquivo ?
Thank you for helping me and for having patience with me .
That success becomes routine in your life .
Dude, you have "cojones"...
Last edited by Verifun (2015-03-28 23:21:48)
Daniel Santos
Offline
#10 2015-10-28 03:31:10
- MichaelS
- Senior Member
- From: Lynnwood, WA
- Registered: 2011-02-01
- Posts: 28
- Website
Re: Windows 7 x64 w/ 7.1.1 x64 License messages and errors
But my Vericut is not the original , it was through a download, and the Crack file came along with it , I did not buy the software .
Where could I find a valid license aquivo ?
Thank you for helping me and for having patience with me .
Just go away.
Michael Stevenson
Vericut Programmer
PCC Aerostructures
Offline