VERICUT Users' Forum

BillH

VERICUT Specialist

From: Irvine, CA

Registered: 2004-10-08

Posts: 146

Website

example setup report, VUE topic

A few of those attending the Seattle-area VUE meeting asked for a copy of the setup report shown there. I placed a set of files (user file, nc program, tool library, etc), including the report template, at:

ftp://ftp.cgtech.com/Download/example_setup_report.zip

The template uses "user defined tags" to display non-VERICUT info, such as the NC programmer name, part number, etc. These values are set by the NC program. Also, an operation table is built by the NC program, using a user defined table.

To give it a try:
  Unzip the content of the zip file into a folder
  Run VERICUT (I think you'll need at least 5.4.3)
  Set your working directory to the folder
  Open example_setup_report.usr
  Simulate it
  File > Report > Report Template > Edit
  Open example_setup_report.vctemplate
  File > Report > Create Report > PDF (or HTML)

Good luck. Let me know how it goes.
Bill