You are not logged in.
Pages: 1
Hello,
Anyone simulating a Mazak HV 630 or 800?
It has a rotary axis for tilting the head which is at 45 degrees from the Z axis.
I have built my machine and control, and have it working at A0 and A90.
I think I have the 3D work plane (set by G68) fully functioning.
The machine has a mode in which, when you tilt the A-axis somewhere between 0 and 90, the B-axis becomes its slave to re-align to the tool axis, I need to develop this next.
Any suggestions are welcome.
Austin NC APT administrator.
Custom configure GPost for Pro/E,
and other ANC applications.
Offline
Pages: 1