You are not logged in.
Hello guys,
I tried to configure such a thing.
In this machine i'm working M53 means that the head is horizontal (B=90 degrees)
M54 means it is vertical (B=0 degrees)
M55 means none of the below (B is between these angles)
I want to see that if i put M54 to the g-code and B is let’s say 20 degrees i should have an error.
That’ll be the case on all others, if there is M53 and B is 40, or There is M55 and B is 90, etc…
I need help on this matter.
Thank you guys,
Cem ALPAY
CGtech Reseller
Istanbul/TURKEY
Offline