VERICUT Users' Forum

Tim Johnson

Member

From: Saint Joseph MI

Registered: 2006-06-02

Posts: 22

300 Offsets Issue

I have a Faunu 18im with the 300 offsets option. Right now I'm trying to probe offsets 1-64 for pallet A and 151-214 for pallet B. The issue I'm having is once Fanuc parameter 4130 reaches 50 it stops. In my Word/Address Variable 14981 (G54 p50 X) is set with the values at 50 and Variable 15001 (G54 P51 X) is set with the values at 151.
In the Advanced Control Options I have
"AutosetTableAxisVars with "Text= Worl Offsets 1 50 14000 20 1 2 3 -1 4"
and also
"AutosetTableAxisVars with "Text= Worl Offsets 151 400 15000 20 1 2 3 -1 4"

This was setup during version 5.44 but The job I'm working on is the first time I've had over 48 parts on one program cycle.

Would someone please give me the fix?

Thanks,

---

Tim Johnson
CNC Programmer
LECO Corp.
---------------------
VERICUT 7.0.3 (64)

DaveH

VERICUT Specialist

From: Irvine, CA

Registered: 2004-10-08

Posts: 23

Website

Re: 300 Offsets Issue

Hi Tim,

What does the code on the line look like when #4130 should be assigned the value of the offset?

Dave H.

Tim Johnson

Member

From: Saint Joseph MI

Registered: 2006-06-02

Posts: 22

Re: 300 Offsets Issue

Dave,

I sent this thru support and Tom B fixed it up for me.

I should have closed this thread. Sorry.

---

Tim Johnson
CNC Programmer
LECO Corp.
---------------------
VERICUT 7.0.3 (64)