VERICUT Users' Forum
Due to relentless spammers, we are no longer automatically accepting new forum registrations. If you wish to register for this forum, please send an e-mail to: info@cgtech.com
You are not logged in.
- Topics: Active | Unanswered
#1 2007-08-02 21:14:12
- nathanc
- Member
- From: Fullerton
- Registered: 2007-07-13
- Posts: 14
Error: Cycle feed is positive along Tool axis
Anybody know what this error means and how to resolve it? ... never heard of it with my limited knowledge of machining
Error: Cycle feed is positive along Tool axis
Thanks!
Nathan
Offline
#2 2007-08-02 22:30:21
- SergeV
- Senior Member
- From: Irvine, CA
- Registered: 2004-10-08
- Posts: 507
- Website
Re: Error: Cycle feed is positive along Tool axis
Are your drilling cycles processing correctly?
this usually means that the cycle depth will be applied in the wrong direction (toward the spindle).
If it is incorrect, change the macro CycleDepth for the macro CycleDepthInv
Offline
#3 2007-08-03 14:53:11
- nathanc
- Member
- From: Fullerton
- Registered: 2007-07-13
- Posts: 14
Re: Error: Cycle feed is positive along Tool axis
everything looks fine in the simulation.... near the first error, there is a G98 and G82 and if i add or replace a CycleDepthInv macro in either or both, the error still comes back (and i did save the ctl file)
Nathan
Offline