VERICUT Users' Forum
Due to relentless spammers, we are no longer automatically accepting new forum registrations. If you wish to register for this forum, please send an e-mail to: info@cgtech.com
You are not logged in.
- Topics: Active | Unanswered
#1 2007-04-12 15:17:13
- Roger Bombassei
- Member
- From: Babylon, Long Island
- Registered: 2006-08-02
- Posts: 75
Good Results Using Optipath for High Speed Machining?
Is anyone using Optipath on a high speed machine and getting good results?
We are programing for a Cincinnati HyperMach.
Offline
#2 2007-04-13 12:55:14
- dkrabbe
- Senior Member
- From: São José dos Campos, Brazil
- Registered: 2006-08-03
- Posts: 24
- Website
Re: Good Results Using Optipath for High Speed Machining?
Hello Roger.
We are running Optipath since 2000 year on our Aluminum High Speed machines 8) . The results shows a very good result for roughing process and small results for finishing process (air cut feedrate). These machines have 15000 RPM and 30 kw of Spindle power. Last year (2006) we started Optipath in a machine more powerfull (30.000 RPM; 55kW) and also the results are perfect. My personal opinion is that you will enjoy this Vericut Feature.
Best Regards
Daniel Krabbe
Thank you and best Regards from Brazil,
Daniel Krabbe
Embraer
São José dos Campos, Brazil
Offline