You are not logged in.
G83 Z.. {X..} {Y..} {B..} {I..} {J..} {K..} {K1=..}
In the control,{K..} is set with CycleStepValue.
{I..} IgnoreMacro.
But {I..} should be CycleStepValue..
{K..} is drilling depth first movement.
Does any one know the macro for drilling depth first movement?
Thank you,
G83 Y.1 Z-4 I0.5 J0.5 K2
G79 X0 Y0 Z0
from top of part Z0, 1st shot to Z-2 then decrement of 0.5 for step.
Offline