VERICUT Users' Forum

Volkov

Member

From: St. Petersburg, Russia

Registered: 2004-12-15

Posts: 25

Website

TP review vs Profile view

Some discrepancies were found while simulating Sinumerik840d turning program in VERICUT 6.0.

There is circle interpolation in ZX plane in program:
...
N8 Z422.7969 F.4
N9 G2 X-230.9578 Z388.7761 I80.5 K0
N10 G1 X-216.0469 Z356.7995
N11 X-216. Z356.5882
N12 Z238.4927
N13 X-206.1792 Z217.4319
N14 G2 X-182.162 Z202.1313 I24.0172 K11.1994
N15 G1 X0
N16 X7.0711 Z209.2024 F.8
...

It seems correct at profile view:

But at Tool Path Review window the circle interpolation blocks looks like having wrong direction:

By the way, some G2/G3 blocks looks correct at TP review and some not.

What's happened?

---

Regards.
Igor
www.bee-pitron.com

SergeV

Senior Member

From: Irvine, CA

Registered: 2004-10-08

Posts: 507

Website

Re: TP review vs Profile view

I would recommend that you send the files to Technical Support for review