VERICUT Users' Forum
Due to relentless spammers, we are no longer automatically accepting new forum registrations. If you wish to register for this forum, please send an e-mail to: info@cgtech.com
You are not logged in.
- Topics: Active | Unanswered
#1 2015-06-24 21:24:21
- bchambers
- Member
- Registered: 2015-06-24
- Posts: 1
Importing 90 degree cutter into Vericut
Hello,
My name is Brian and I am new to Vericut and need some help.
I am running Vericut 7.3.1 and I have an Alberti TSLcn-0.3 with CAT-50 and I=80. This is a 90 degree right angle tool for a #30 drill with a 1.5in stick out from centerline. I have a model of it in CATIA, and I have a model of the Spindle of the machine in CATIA as well. In case it matters, I am running CATIA 2014. How do I get my setup into Vericut? Can I use CATV to import right angle cutters into Vericut?
Thanks,
Brian
Offline
#2 2015-06-25 15:54:32
- Vericut_McAtee
- Senior Member
- From: Fryeburg, Me.
- Registered: 2011-07-17
- Posts: 88
Re: Importing 90 degree cutter into Vericut
Treat it like a tool holder and save it off as an stl file, gage point is where right angle head mounts to spindle and drive point is the end of the tool
Offline