VERICUT Users' Forum

Due to relentless spammers, we are no longer automatically accepting new forum registrations. If you wish to register for this forum, please send an e-mail to: info@cgtech.com

You are not logged in.

#1 2014-08-13 06:00:56

casper
Member
Registered: 2011-03-17
Posts: 4

PowerMill License is removed when installing VERICUT 7.3.1.

We use PowerMill 2010 ~ 2014.
I would like to install the VERICUT 7.3.1.
PowerMill License is removed when installing VERICUT 7.3.1.
I'd like to set on the same server, is there a way?

Someone told me that it is cause of different license version.
( PowerMill 2010 : WlmAdmin Version 8.2 <=> VERICUT 7.3.1 : WlmAdmin Version 8.5 )
What is the correct solution?


-------------------------------------------------------------
|  Jung-Hyun ,Oh      |  Office1 :  +82 -  31 - 426 - 1551  |
|                     |  Office2 :  +82 -  70 - 4907 - 5815 |
|  General Manager    |  Fax     :  +82 -  31 - 463 - 3737  |
|  (오 ì • 현 차장)    |  Mobile  :  +82 -  10 - 2603 - 8403 |
|---------------------|  E-mail  :  jhoh@cims.co.kr         |
|  CAD/CAM/API/PLM    |            nx.manager@gmail.com    |
|  Post Processor     |     Home    :  http://www.cims.co.kr/  |
-------------------------------------------------------------

Offline

#2 2014-08-13 08:24:09

Tony
Moderator
From: Crewe, England
Registered: 2007-02-20
Posts: 128
Website

Re: PowerMill License is removed when installing VERICUT 7.3.1.

You need to check with Delcam to see if the Powermill license can run on Sentinel 8.5


Tony

Offline

#3 2014-08-13 10:50:58

casper
Member
Registered: 2011-03-17
Posts: 4

Re: PowerMill License is removed when installing VERICUT 7.3.1.

Delcam says their license server is not a standard RMS.
Previously the solutions had been to read the VERICUT license onto their own implementation of the RMS server. But currently VERICUT 7.3.1 license can't read.
They know the issue but don't have correct solution currently. ( my opinion )

-------------------------------------------------------------
|  Jung-Hyun ,Oh      |  Office1 :  +82 -  31 - 426 - 1551  |
|                     |  Office2 :  +82 -  70 - 4907 - 5815 |
|  General Manager    |  Fax     :  +82 -  31 - 463 - 3737  |
|  (오 ì • 현 차장)    |  Mobile  :  +82 -  10 - 2603 - 8403 |
|---------------------|  E-mail  :  jhoh@cims.co.kr         |
|  CAD/CAM/API/PLM    |            nx.manager@gmail.com    |
|  Post Processor     |     Home    :  http://www.cims.co.kr/  |
-------------------------------------------------------------

Offline

Board footer