VERICUT Users' Forum

Due to relentless spammers, we are no longer automatically accepting new forum registrations. If you wish to register for this forum, please send an e-mail to:

You are not logged in.

#1 2014-10-22 05:38:53

From: Austria
Registered: 2009-07-07
Posts: 13

Stop at specific tool ID

Hi all,

I'd love to see a possibility to stop when a specific tool ID is loaded.
Currently I use stop at Text, but this is different depending on which machine I'm simulating. On our WFL it's simple <tlch1("tool ID">, but with our milling machines it's much more difficult:
<T="tool ID"> or just <Ttool ID> + new line + <Nxxx L700> or just <L700>, depending on the currently used CAM-System and Machine. I now always open the nc file, look for a specific text (comment, feed data, ...) and use this as stop text sad .
It would be great to have a possibility to select Stop At Tool ID smile .

Regards, Thomas


#2 2014-10-23 07:28:17

From: Crewe, England
Registered: 2007-02-20
Posts: 128

Re: Stop at specific tool ID

Ask your CGTech Tech Support guy to enter an Enhancement Request on your behalf to get this feature added.



Board footer